This full metal Z axis yoke kit attaches your heated bed/build platform (not included) to the Z axis liner rails. It replaces the 3D printed Z axis yokes.

All pieces are made out of high strength 7075 T6 aluminum and the kit includes all needed screws.  We have leveraged the properties of 7075 aluminum to allow us to more freedom in the design aesthetic while still maintaining the needed strength in our parts.

This kit consists of 6 milled 7075 pieces and all required screws.  There are 3 yoke risers and 3 yoke platforms.  The yoke platforms have 4 M3 form threaded holes and 4 M3 pass thru holes on the flange so they are compatible with either threaded or non-threaded lead screw nuts.  The yoke platforms are designed to be universal so that each one will work on any of the 3 Z axis liner rails by simply flipping them over.  No more guessing which yoke platform needs to be mirrored, just choose one and flip it over!  Also the lead screw nut can easily be mounted above or below each of the yoke platforms for maximum flexibility.

This kit is designed to fit the stock, small, Delrin anti-backlash lead screw nuts with either threaded or non-threaded mounting holes.  This kit is also compatible with any small brass or Delrin (regular or anti backlash) lead screw nuts with a 16mm bolt pattern configuration and 22m flange diameter.  Please note that this kit is not compatible with large Delrin nuts (those with a 30mm flange).

Please see instructions tab for assemble directions.

Kit includes:

x3 Z axis yoke risers

x3 Z axis yoke platforms

x6 M4 16mm 12.9 alloy steel socket head cap screws (black, uses a 3mm hex tool, not included)

Optional:

If you are interested you may also purchase low profile M4 16mm 12.9 alloy steel, zinc coated, socket head cap screws here. These low profile zinc coated screws not only match the shiny aluminum finish of the parts, but they also sit almost flush to provide a sleeker look to your printer.  We have found that these provide a cleaner look when using the flipped yoke configuration where these screws are visible.

All 713Maker.com products are designed and produced in our home-shop here in the USA.