Due to a large order depleting our stock on hand and delays from our supplier, we are temporally suspending sales of some items until we have the needed stock on hand once again.

This product is released for sale in small batches.  Once ordered, please allow up to 5 business days processing time prior to shipping. 

No stock is held.

This magnetic heated bed is designed for the 250ZL series of the RailCore II printers. Click here for Railcore II ZL series info

Milled from .250 (6.4mm) Mic 6 cast aluminum alloy tool plate. Mic 6 cast tool plate is flat with milled front and back faces to produce a high quality build platform for the RailCore 250ZL series of printers.

The front of the heated bed features a recessed thermistor channel and recessed attachment lugs. The edges are chamfered to produce a beautiful finishing touch to this flat heated bed platform. The 20 super high temperature neodymium magnets are recessed into custom milled pockets on the backside of the bed.  These magnets are good to 150C (302F).  The high density of magnets allow for greater variety of flex sheet (not included) sizes and print area locations.

We take great care to provide the highest quality milled aluminum heated beds, but minor tooling marks or superficial surface marks may be present from time to time. We always strive to be sure the build surface is free of defects that will effect printing. To prolong the life of your bed, the urge you to never print directly on the aluminum surface to avoid damaging the bed surface and effect print quality.  As with all magnetic heated beds, normal wear and tear to the surface of this bed will occur due to the placement and removal of the flex sheet.   Although we do use tool plate aluminum and stringent quality control, please inspect your bed for defects and levelness prior to installing any accessories onto the bed.  We are not responsible for accessories (heaters, thermistors, wasted filament, etc.).  If you feel that there is an issue with your bed please feel free to contact us for assistance.

There are various resources for flex sheet providers. We have tested and recommend the Buildtak FlexPlate.  Please be aware flex sheets vary widely in magnetic strength due to the different sheet thicknesses and steel alloys used.  In our testing we have seen a reduction in lateral pull force performance of 1/2 to 1/3 pull strength, with Wham Bam and various other, off brand flex sheets.  We have tested our beds with the Buildtak brand and for best performance, we highly recommend, using it with our magnetic beds.

Please note:

The magnets will likely cause interference with the some inductive probes and with the metal tipped BLtouch bed leveling probe.  For best results we suggest to use the plastic tipped BLtouch bed leveling probe.

This product is released for sale in small batches.  Once ordered, please allow up to 5 business days processing time prior to shipping. 

No stock is held.

WARNINGS:

The magnets used in this bed are very powerful. Please take care to remove all ferrous items in your work area when working with this bed.  The magnets can cause a pinch hazard and can be detrimental to electronics and other sensitive items (cell phones, control boards, credit cards, etc.)  We are not responsible for any damages.