Rostock - Basic kit

Compatible with SeeMeCNC Rostock Max Delta V2 & V3 and Orion printers.

More details

Open contact form

close

General contact form

 

$35.00

Add to wishlist

More info

Basic Kit Includes:

  • 1 Standard hotend mount
  • 1 Lock ring
  • 1 Wire strain relief  (not included when accelerometer probe lock ring is chosen)
  • 1 set of 3 carbon fiber spacers with aluminum spacer end caps (tapped for M3 screws)
  • all needed screws

  

Optional - Effector plate 

Choose the type of effector plate based on what arms you have

  • Ball cup style arms
  • U joint style arms
  • $10 kit discount, when the effector plate is added to this kit vs being bought separately

Please read here for additional details about effector plate types.

Feel free to contact us with questions regarding effector plate types PRIOR to ordering as we cannot refund or exchange effector plates that have been ordered incorrectly.

Please choose shiny or matte (non-anodized) finish

Choose your type of lock ring based on what hot end you have

  • Standard
  • Bowden adapter
  • SeeMeCNC
  • Accelerometer probe

STANDARD

Standard lock ring fits most standard J-head with built-in bowden tube attachments

E3D V6

E3D Volcano

E3D Lite6

Prometheus V2

This lock ring has an inner diameter of 12.75 mm

  

BOWDEN

Bowden adapter lock ring fits most standard J-head hot ends without built-in bowden tube attachments

This lock ring has a threaded M5 hole for the attachment of a standard bowden tube adapter (not included)

  

SEEMECNC

SeeMeCNC lock ring fits stock SeeMeCNC hot end.  Allows the use of the Rostock V2 stock SeeMeCNC hot end with our mount 

This lock ring has an inner diameter of 11 mm

 

ACCELEROMETER PROBE

This lock ring fits the SeeMeCNC accelerometer probe PCB board (not included).

Allows the use of the calibration board with our mount system.

Comes with all needed screws.

You must specify the spacer length you need, in millimeters, on the Product Customization tab

You order may be delayed without this info

When using our mount system we recommend the following spacer sizes based on your hotend and effector choices.  If you have needs other this those listed, you may specify a custom spacer size (minimum 25 mm).

Without Effector With U-Joint Effector With Ball Cup Effector
J Head or stock V2 SeeMeCNC (resistor style heater) 25.4 mm 34 mm 36 mm
E3D V6 34 mm 36 mm 38 mm
Prometheus V2 36 mm 38 mm 40 mm

Feel free to contact us with questions regarding spacer length PRIOR to ordering as we cannot refund or exchange spacers that have been ordered the wrong length.

Reviews

Write a review

Rostock - Basic kit

Rostock - Basic kit

Compatible with SeeMeCNC Rostock Max Delta V2 & V3 and Orion printers.

Product customisation

After saving your customized product, remember to add it to your basket.

Text

loader

* required fields