Welcome to 713Maker.com

3D Printer Hot End Mounting Brackets

Custom Hot End Mounts for SeeMeCNC Rostock Max and Orion 3D Printers

Choose the kit or pick your own pieces!




Basic Kit Includes:

          (not included when accelerometer probe lock ring is chosen)

end caps (tapped for M3 screws)


     effector plate is added to this kit

     vs being bought separately)


Choose from the following finishes for your mount, lock ring, and spacer

end caps.

See color and finish samples here


Choose your type of lock ring

(See details in compatibility section above)



Please specify if you need the Yellow Jacket capability option if you need the required

nylon screws to be added to your kit  (No extra charge). To be used with your

existing yellow jacket PCB.



You must specify the spacer length you need, in millimeters

You order may be delayed without this info


When using our mount system alone (without our effector plate), we recommend the following sizes:



When using our mount system combined with our effector plate, we have discovered that you’ll need to add 2mm (for U Joint style) or 4mm (for Ball Cup style) to your normal spacer length, due to the thin design of our effector plate.


We can also create any custom spacer size that you specify



Optional Effector Plate

Choose the type of effector plate based on what arms you have



(Click here for additional compability details)




Choose from the following finishes for your effector plate

See color and finish samples here



Click here to buy an effector plate separately



Materials

All mounts and spacer end caps milled from Alca 1/4” 5083 toolplate.  All lock rings milled from 5052 aluminum.  All spacers are 10mm diameter carbon fiber tubes with aluminum end caps that are tapped to fit M3 screws.  The Yellow Jacket capability option of the basic kit also includes nylon screws (Yellow Jacket not included).



Carbon Fiber Spacers

Each set contains 3 carbon fiber spacers in

the length you specify.  Choose from a standard length

or specify a custom length.  They come with

aluminum spacer end caps tapped on

each end to fit M3 screws.  



Feel free to contact us with questions regarding spacer length

prior to ordering as we cannot refund or exchange spacers that

have been ordered the wrong length.


You must specify the spacer length you need, in millimeters.

You order may be delayed without this info.


Choose from the following finishes for your spacer end caps.

See color and finish samples here



Lock Rings


Choose your type of lock ring

(See details in compatibility section above)



Choose from the following finishes

See color and finish samples here


Basic Kit - $35


Basic Kit with

Effector Plate - $65

A La Carte

     Carbon Fiber Spacers (set of 3) - $8

     Lock Rings - $1.50 - $5.00

Mounts


Standard and Under mounts

Fits the following hot ends:


Mount is compatible with the Yellow Jacket from The Maker Hive.  Yellow Jacket PCB replaces the lock ring and holds the hot end to the mount with nylon screws.










Chimira/Cyclops mount

Fits the following hot ends:




Lock Rings


STANDARD

Standard lock ring fits most standard J-head with

built-in bowden tube attachments


This lock ring has an inner diameter of 12.75 mm




BOWDEN

Bowden adapter lock ring fits most standard J-head hot

ends without built-in bowden tube attachments


This lock ring has a threaded M5 hole for the attachment

of a standard bowden tube adapter (not included)




SEEMECNC

SeeMeCNC lock ring fits stock SeeMeCNC hot end


Allows the use of the Rostock V2 stock SeeMeCNC hot end with our mount


This lock ring has an inner diameter of 11 mm




ACCELEROMETER PROBE

This lock ring fits the SeeMeCNC accelerometer probe PCB board

(not included).


Allows the use of the calibration board with our mount system.

Comes with all needed screws.






Wire Strain Relief

The Basic and Under-mount kits include a wire strain relief.  It attaches

on top of the lock ring on whichever of the three sides works best

for your needs.

as the lock ring.


















If you do not find a mount or lock ring that suits your needs, please feel free to contact us.

Compatibility

Dial Indicator Mount - $15

Take the guess work out of calibrating your printer

by using this custom mount designed specifically to hold a

dial indicator (not included).  This mount is tapped for M3

screws allowing for easy use and accurate calibration.


Choose from the following finishes:

See color and finish samples here


Please note due to the numerous dial indicators available,

this mount will require a 3D printed sizing piece.  We have

an example .stl file available, here.



Allows you to under-mount your hotend to

the effector plate.  


The difference between this kit and the basic kit

is that the mounting holes are tapped to M3 instead of just

being pass thru holes.  This allows you directly attach the mount

to the underside of the effector plate with the included M3 screws.

No carbon fiber spacers are included in this kit.

Note: Please email us for Yellow Jacket compability.


Includes:


     effector plate is added to this kit vs being bought separately)


Choose your type of lock ring

(See details in compatibility section above)



Choose from the following finishes for your mount, and lock ring

See color and finish samples here


Optional Effector Plate

Choose the type of effector plate based on what arms you have


(Click here for additional compability details)



Choose from the following finishes for your effector plate

See color and finish samples here


Click here to buy an effector plate separately

Under-mount Kit - $25


Under-mount kit with

Effector plate - $55

Please feel free to contact us with any questions!

Type of kit
Mount color choices:
Lock ring type:
Lock ring color choices:
Spacer color choices:
Spacer length (mm). Yellow jacket screws (Y/N):
Effector plate color choices:
Type of kit
Mount color choices:
Lock ring type:
Lock ring color choices:
Effector plate color choices:
Spacer End Cap Color choices:
Spacer Length (mm)
Custom Spacer Length (mm)
Mount color choices:
Lock ring type
Lock ring color choices:

What are the benefits of these mounts?

Our mount kits are created with the maker in mind.


Our hot end mounts are made from precision tool plate aluminum which will provide amazing stability and will help to maintain your machine’s accuracy.  Our mounts won’t wear out like wood or 3D printed mounts do over time.


The dial indicator mount allows for amazingly precise calibrations.  This mount takes the uncertainty out of your calibration.  No more using paper to slide under your hot end and guessing if it feels right.


The custom finishes and a wide selection of colors provide your machine with that extra pop of color.


And the best thing is….

The mounts were designed to allow for you to easily change out hot ends by removing only a few screws. No more having the entire assembly fall apart in your hands just to change out a single part.




Click here for shipping information



Assembly instructions can be found here

Chimira/Cyclops Mount Kit - $30


Chimira/Cyclops Mount Kit

with Effector Plate - $60




Includes:


when the effector plate is added to this

kit vs being bought separately)



Optional Effector Plate

Choose the type of effector plate based on what arms you have


(Click here for additional compability details)


Choose from the following finishes

See color and finish samples here


Click here to buy an effector plate separately

Type of kit
Mount color choices:
Effector plate color choices: